pantilt-2021-2022.rst

Build a pantilt 2021 and 2022

The 3D model of the camera turret can be downloaded here: 3D Model. It is provided as an F3D file, openable on Fusion 360. A .gcode file is also provided, but it only applies to printing a single turret kit on a Prusa Mini+ with PLA Prusament. It cannot be used in any other configuration.

Recommended settings are:

• Layer thickness: 0.2 mm
• Material: PLA
• Temperature: depends on your PLA
• Supports: only on the tray

To move, the turret needs 2 standard servomotors of 9g type SG90.

They can be bought on Aliexpress for about 3€50 or on Amazon for about 10€.

Note

To assemble the turret, you can follow the manual :doc:`/assemble/pantilt/pantilt-2021-2022/pantilt-2021-2022`.